User manual

If "dEMo" appears on the display, refer to
"Troubleshooting" .
Switching off
1. Press the appliance ON/OFF for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the power
socket.
Temperature regulation
Set the temperature of the appliance by pressing
the temperature regulators.
Default set temperature:
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by flashing the alarm
icon and freezer temperature indicators, and
sounding of buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows the
highest temperature reached for a few seconds,
then displays the set temperature again.
The alarm indicator continues to
flash until the normal conditions are
restored.
FastFreeze function
The FastFreeze function accelerates the freezing
of fresh food and, at the same time, protects
foodstuffs already stored from undesirable
warming.
1. To activate this function press the Functions
button until the corresponding icon appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
TheFastFreeze indicator is shown.
This function stops automatically after 52 hours.
To switch off the function before its automatic
end repeat the procedure until the FastFreeze
indicator turns off.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored (door
closed), the alarm will stop. The buzzer can also
be switched off by pressing any button.
ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Functions until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat the
procedure until the ChildLock indicator goes off.
DrinksChill function
The DrinksChill function is to be used to set an
acoustic alarm at the preferred time, useful for
example when a recipe requires to cool down
food products for a certain period of time.
It is also useful when a reminder is needed in
order not to forget the bottles placed in the
freezer for fast cooling.
1. Press Functions until the corresponding icon
appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for
a few seconds.
2. Press the Timer regulator to change the Timer
set value from 1 to 90 minutes.
Freezer User Manual
8