User manual

Positioning
Warning! If you are discarding an
old appliance that has a lock or catch
on the door, you must ensure that it
is made unusable to prevent young
children being trapped inside.
Important! The appliance should have the
plug accessible after installation.
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Removing the shelf
holders
Your appliance is equipped with shelf
retainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction
of the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
A
B
C
Electrical Connection
Caution! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any
liability should these safety measures
not be observed.
Important! The wires in the mains lead are
coloured in accordance with the following
code:
15