User manual

What to do if…
Warning! Before
troubleshooting, disconnect the
mains plug from the mains
socket.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
Important! There are some sounds
during normal use (compressor,
refrigerant circulation).
Problem Possible cause Solution
The appliance does not
operate. The Pilot light
does not flash.
The appliance is switched off. Switch on the appliance.
The mains plug is not connected to
the mains socket correctly.
Connect the mains plug to the mains
socket correctly.
The appliance has no power. There
is no voltage in the mains socket.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The Pilot light flashes.
The appliance is not working
properly.
Contact a qualified electrician.
The Alarm light flashes.
The temperature in the freezer is
too high.
Refer to "Excessive Temperature
Alarm"
The acoustic alarm sounds
The temperature in the freezer is
too high.
Refer to "Excessive Temperature
Alarm"
The door is left open. Close the door.
The compressor operates
continually.
The temperature is not set
correctly.
Set a higher temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open longer
than necessary.
The product temperature is too
high.
Let the product temperature
decrease to room temperature
before storage.
The room temperature is too high. Decrease the room temperature.
The Fast Freeze function is switched
on.
Refer to "Fast Freeze function".
The temperature in the
freezer is too low.
The temperature regulator is not set
correctly.
Set a higher temperature.
built-in-freezer user manual 13