User manual

Installation
Read the "Safety Information"
carefully for your safety and
correct operation of the
appliance before installing the
appliance.
Positioning
This appliance should be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate class
indicated on the rating plate of the appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems might occur for some
types of models when operating outside of that
range. The correct operation can only be
guaranteed within the specified temperature
range. If you have any doubts regarding where
to install the appliance, please turn to the
vendor, to our customer service or to the
nearest Service Centre
Electrical Connection
Caution! Any electrical work
required to install this appliance
should be carried out by a
qualified electrician or
competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any
liability should these safety
measures not be observed.
AB
C
D
E
Important! The wires in the mains lead
are coloured in accordance with the
following code:
AGreen and Yellow: Earth
CBrown: Live
EBlue: Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with
the letter “E“ or by the earth symbol
or
coloured green and yellow.
16 built-in-freezer user manual