User manual

Control panel
1 4352
1
Pilot light
2
Temperature regulator
3
Fast Freeze light
4
Fast Freeze switch
Acoustic alarm reset switch
5
Alarm light
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise
to a medium setting.
3. The Pilot light will light up and a sound is on
only for 2 sec. indicating that the appliance
is powered.
4. The Alarm light will blink and the sound
signal alarm will get on, indicating that the
temperature inside the appliance is too
high.
5. Push the Fast Freeze switch and the sound
signal alarm will get off.
6. Push the Fast Freeze switch once again and
the Fast Freeze light will light up. The
freezer will start to operate.
Switching off
1. To turn off the appliance, turn the
Temperature regulator to the "O" position
and a sound is on only for 2 sec.
2. The pilot light will switch off.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature regulator
situated at the bottom of the cabinet.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower
settings to obtain the minimum coldness.
• turn the Temperature regulator toward
higher settings to obtain the maximum
coldness.
A medium setting is generally the most
suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Fast Freeze function
You can activate the Fast Freeze function by
pressing the Fast Freeze switch.
The Fast Freeze light will light up.
It is possible to deactivate the function at any
time by pressing Fast Freeze switch.
The Fast Freeze light will switch off.
6 built-in-freezer user manual