User manual

Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands stable.
Audible or visual alarm is on. The cabinet has been recently
switched on or the temperature is
still too high.
Refer to "Door Open Alarm/Indica-
tor" or "High Temperature Alarm/
Indicator".
The temperature in the appliance
is too high.
Refer to "Door Open Alarm/Indica-
tor" or "High Temperature Alarm/
Indicator".
A square symbol is shown instead
of numbers on the temperature
display.
Temperature sensor problem. Contact the nearest Authorised Serv-
ice Centre (the cooling system will
continue to keep food products cold,
but temperature adjustment will not
be possible).
The compressor operates continu-
ally.
Temperature is set incorrectly. Refer to "Operation"/"Control Panel"
chapter.
Many food products were put in
at the same time.
Wait a few hours and then check the
temperature again.
The room temperature is too
high.
Refer to climate class chart on the rat-
ing plate.
Food products placed in the appli-
ance were too warm.
Allow food products to cool to room
temperature before storing.
The Super function is switched on. Refer to "Super function".
Freezer User Manual14