User manual

Problem Possible cause Solution
The compressor does not start
immediately after pressing the Su-
per or after changing the tempera-
ture.
This is normal, no error has oc-
curred.
The compressor starts after some
time.
Water flows on the floor. The melting water outlet is not
connected to the evaporative tray
above the compressor.
Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set. The Super or Shopping function is
switched on.
Switch off Super or Shopping manual-
ly, or wait until the function resets au-
tomatically to set the temperature.
Refer to "Super or Shopping function".
DEMO appears on the display. The appliance is in demonstration
mode.
Keep the OK pressed for approxi-
mately 10 seconds until a long sound
is heard and display shuts off for a
short time.
The temperature in the appliance
is too low/too high.
The temperature regulator is not
set correctly.
Set a higher/lower temperature.
The food products temperature is
too high.
Let the food products temperature
decrease to room temperature be-
fore storage.
The Super function is switched on. Refer to "Super function".
Door does not open easily. You attempted to re-open the
door immediately after closing.
Wait a few seconds between closing
and re-opening of the door.
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.
Freezer User Manual 15