Brochure

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2007 Johnson Controls, Inc.
www.johnsoncontrols.com
1 of 1
A-4000-1037, -146, -147, -1048, -1049, -152, -6001
Oil Removal Filters
Code No. LIT-1921125
Issued September 25, 2007
Description
Combining coalescing and activated carbon
filters in series provides clean, oil free air by
removing both oil aerosols and vapors in
pneumatic control systems.
Note: The air supply to this filter combination
must be from a properly broken-in-air
compressor producing less than 6 ppm
aerosol oil (as measured by a Johnson
Controls® A-4000-120 Oil Indicator on the
compressor tank outlet) and must also pass
through a properly operating air dryer.
Repair Information
If the oil removal filter fails to operate within its
specifications, replace the unit. For a
replacement filter, contact the nearest
Johnson Controls® representative.
Selection Charts
Technical Specifications
A-4000-1037, -146, -147, -1048, -1049, -152, -6001
Code Number Description Connection
A-4000-1037 Inline Filter 1/4 in. Barb
Coalescing Filter 3/8 in. NPT
Nominal scfm (L/s)
10 (4.7)
20 (9.4)
40 (18.9)
Maximum scfm (L/s)
17 (8.0)
30 (14.1)
50 (23.5)
A-4000-1048
A-4000-1049
A-4000-6001
Activated Carbon Filters 1/2 in. NPT
A-4000-147
A-4000-146
Nominal scfm (L/s)
10 (4.7)
20 (9.4)
Maximum scfm (L/s)
12 (5.6)
23 (10.8)
A-4000-152 Universal Mounting Kit 3/8 and 1/2 in.
NPT
A-4000-604, -605, -6010, -632, -633, -1054, -A-4110-604
Code Number Description
Coalescing FIlter Elements
A-4110-604
A-4000-604
A-4000-605
Nominal scfm (L/s)
10 (4.7)
20 (9.4)
40 (18.9)
Maximum scfm (L/s)
17 (8.0)
30 (14.1)
50 (23.5)
Activated Carbon Filter Elements
A-4000-632
A-4000-633
Nominal scfm (L/s)
10 (4.7)
20 (9.4)
Maximum scfm (L/s)
12 (5.6)
23 (10.8)
A-4000-6010
1
1. The A-4000-6010 auto drain and A-4000-1054 manual override assemblies
are only compatible with each other and do not work with A-4000-610 auto
drain and A-4000-154 manual override assemblies.
Auto-Drain Kit (All Coalescing Filters)
A-4000-1054
1
Manual Override
Oil Removal Filters
Maximum Input Pressure 125 psig (862 kPa) A-4000-1037 (2600 scim)
150 psig (1034 kPa) A-4000-146 (23 scfm)
A-4000-147 (12 scfm)
A-4000-1048 (12 scfm)
A-4000-1049 (23 scfm)
A-4000-6001 (40 scfm)
Temperature Limit 125°F (52°C)
A-4000-1048
A-4000-1049
A-4000-6001
A-4000-1037
A-4000-146
A-4000-147
A-4000-152
Universal Mounting Kit
A-4000-6010
Auto-Drain Kit