Brochure

WTL-PD1-00, WTL-PR1-00, WTL-PD2-00, WTL-PR2-00, WTL-PD3-00, WTL-PR3-00, WTL-WRG-00, WTL-
GBC-00, WTL-SK-00
Description
WTL Thermostats
The WTL (Wireless Pneumatic Thermostats
LoRa) Series Wireless Thermostat is a pneumatic
thermostat that retrofits existing pneumatic
thermostats to provide Direct Digital Control
(DDC) such as single zone control functionality at a
fraction of the time and cost, without disturbance to
occupants.
The WTL Thermostat controls the following
equipment:
Variable air volume (VAV) cooling only
VAV with hot water
Hot water radiator
Induction unit single coil summer/winter
Induction unit two coils heating or cooling
Fan coil
Constant air volume (CAV) with mixing box
CAV with hot water reheat
The WTL Thermostat is available in the following
direct-acting and reverse-acting models:
Single setpoint, for cooling only or heating only
applications.
Dual setpoints, for heating and cooling
applications.
Summer/winter, for single setpoint control with
summer and winter mode.
Use the WTL Thermostat to remotely monitor the
zone temperature and branch pressure, remotely
control the temperature setpoints, and program the
setback.
You can integrate the WTL Thermostat with
an existing building management system
(BAS) through BACnet
®
/IP. As a result, the
WTL Thermostat can help save energy through
the implementation of energy savings control
strategies, improve comfort, and reduce the
maintenance cost of the legacy pneumatic HVAC
systems.
All WTL Thermostat models feature a white plastic
cover with the Johnson Controls
®
logo.
Figure 1: WTL Thermostat
Gateway and Control Server
Use the WTL Gateway to connect WTL Thermostats
to a LoRaWAN
®
wireless network. Each gateway
creates its own LoRa wireless network. Connect the
gateway to a WTL Control Server for remote control
of WTL Thermostats. One control server pairs with
one gateway. You can map up to 125 thermostats
WTL Series Catalog Page
LIT-1901161 2021-11-15

Summary of content (6 pages)