Installation Sheet (Antique Gold)

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

1.Fix the rod(O) with lamp holder by nipple(P)

2.Connect rod (O) with K, then tighten rhomb loop (I) onto J, and fix the metal frame(L) onto N with finial(M).

3.Connect chain(H) by rhomb loop(I) and hang loop(G)

4. Fix the mounting bracket(B) to the outlet box with machine screw(C).

5. Make wire connections, with wire connectors(E), following the reference chart listed below.

Connect, Hot, Black or Red Outlet Supply Wire to:

Connect, Neutral, White Outlet Supply Wire to:

Black

White

* Parallel Cord (round & smooth)

* Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes)

Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor

Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw(B) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

6. Orient the ceiling canopy(F) so that the short threaded rod(D) protruding from the mounting bracket go into

the holes in the canopy, then secure it with the canopy nut(S).

7. Install bulbs(Q). Be sure to use light bulb(s) with wattage no greater than specified on this

fixture. Always make sure that electrical current is turned off before changing bulbs.

PLEASE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB

MAX 9-WATT. THERE ARE 8PCS LED 4-WATT BULBS IN THE BOX

ENJOY YOUR LAMP

2/2