Instructions / Assembly

PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
THERE
IS
LED
9
-
WATT
BULB
IN
THE
BOX
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the Harp (H) into the Saddle (F). Put the light on a level surface to check
Do not rotate lam
p
bod
y
too hard avoid base screw broken Put the shade
(
J
)
on the Har
p(
H
)
, then if ever
y
thin
g
is stable.
Do
not
rotate
lamp
body
too
hard
avoid
base
screw
broken
Put
the
shade(J)
on
the
Harp(H),
then
if
everything
is
stable.
Pull cord through lamp base(A) to tighten stem connections, tighten the Finial (K) into the Harp (H)
Screw the part (B) onto the base (A) Insert the bulb(I) into the socket(G).
Screw the part (C) onto the part (B)
Screw the part (D,E,F,G) onto the tube(C)
ENJOY YOUR LAMP