Use and Care Manual

DRAWER, HOOD & ATTACHMENTS
2
3
1
Pull the tab under the speed control
switch to slide the DRAWER out from
under your Jooltool. Push to slide in.
Great for storing small items!
The drawer transforms into a handy
water tray. Slide it completely o the
tool, then mount it by inserting the
2 locator pins into the 2 holes at the
top of the Jooltool.
The drawer/water tray can hold water
for quick access to lubrication when
performing lapidary work. (p.18-19)
WARNING! DO NOT OVERFILL!
WATER CONTACT WITH WIRES MAY
CAUSE RISK OF ELECTRIC SHOCK!
Push OUT on both sides of the hood.
Slide the Hood out and away from the
Jooltool. Reverse steps 1 & 2 to reinstall
(Center the rear tab, pull towards you,
snap tabs back into their slots)
With the Hood removed, you can
now work on very large items and
have even more freedom with the
exshaft & accessories (see below).
Use the multi-functional TOOL REST to quickly
sharpen drill bits or chisels to precise, repeatable
angles. (See p.12-13) Can also be used as a
convenient hand-rest when handling smaller items.
(may be sold separately)
USEFUL FEATURES
The Flexshaft attaches to heavy-duty Handpieces
to use Dremel-type bits, Drilling burrs, power
carvers, sanders and more...
(see FLEXSHAFT (p. 24) in this booklet)
(may be sold separately)
Item# K-FH33Item# TR-1
321
STORAGE DRAWER & WATER TRAY
HOOD REMOVAL
TOOL REST FLEXSHAFT & ACCESSORIES
Toll Free: 1-85-JOOLTOOL p.10 Buy supplies at WWW.JOOLTOOL.COM