Use and Care Manual

Undock the Jooltool from its
base per steps above (1 to 4)
Set the Jooltool to its side and
align the Holes at the rear of
the Tool with the ALIGNMENT
PINS on the BASE. Speed
control switch will be pointing
upward when properly docked.
Press DOWN to lock in position,
front HOOK will snap into the
SLOT of the JOOLTOOL body.
To reset Vertical Mode, press
EJECT then reverse steps 1 & 2.
This is a classic, bench style
of polishing and nishing.
NOTE: The Vacuum Port is
fully functional in both
Horizontal & Vertical modes.
PORTABLE & HORIZONTAL MODES
Press EJECT BUTTON to
release the tool from base.
Use the retractable handle at
the rear of your JOOLTOOL to
work in PORTABLE mode.
Use the PORTABLE mode for
sanding or polishing large
items such as silver trays,
furniture, hardware, and more.
The Jooltool is also great for
removing scratches from
headlight lenses and gently
bung clear-coated surfaces.
The Handle has 2 convenient built-in hooks.
You can hang the JOOLTOOL upright or
upside-down, wherever you see t.
Perfect when using the Flexshaft accessory!
HOW TO SWITCH
GENTLY tilt machine upwards Slide machine away from
ALIGNMENT PINS to fully
detach from docking base.
1 2
5 6
3 4
1
2 3 4
WARNING:
NEVER USE THE JOOLTOOL WITH SEE-THRU BACKPADS IN HORIZONTAL OR PORTABLE MODES!
THESE MODES ARE ONLY FOR USE WITH 3M RADIAL BRISTLE BRUSHES & PURPOSELY DESIGNED ACCESSORIES.
ALWAYS DOCK THE TOOL VERTICALLY ON ITS BASE WHEN USING SEE-THRU BACKPADS!
NEVER TRY TO SHARPEN WITH SEE-THRU DISCS WHILE IN HORIZONTAL OR PORTABLE MODES,
THIS NULLIFIES THE SEE-THRU EFFECT AND CAN CAUSE YOU TO LOSE CONTROL OF THE WORKPIECE.
FAILURE TO FOLLOW THESE DIRECTIONS CAN RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE!
!
BUILT-IN HOOKS
PORTABLE MODE
HORIZONTAL MODE
Toll Free: 1-85-JOOLTOOL p.11 Buy supplies at WWW.JOOLTOOL.COM