Use and Care Manual

SHARPENING
FOLLOW THESE STEPS TO SHARPEN
Toll Free: 1-85-JOOLTOOL p.15 Buy supplies at WWW.JOOLTOOL.COM
STEP 2 SHARPEN, HONE and MAINTAIN EDGES
Follow these steps for re-sharpening and honing.
Use 3M Trizact abrasives, the colorful discs.
Speed: Maximum
Follow this order:
Coarse Green
Medium Pink
Fine Blue
Very Fine Orange
2
STEP 3 POLISH METALS
Use the FELT DISC to get a final polish on your metal.
SEE “POLISHING BASICS” (p. 16)
Speed: Maximum
3
STEP 1 GRIND, SHAPE and BEVEL EDGES
Follow these steps for grinding and shaping.
Use 3M Purple Ceramic abrasives.
Speed: Maximum
Follow this order:
80 Grit, 120 Grit, then 220 Grit.
1
FOLLOW FROM
TOP TO BOTTOM
80 Grit
Item# AC-13080-6
1a
120 Grit
Item# AC-13120-6
1b
220 Grit
Item# AC-13220-6
1c
IMPORTANT: Stay within your see-thru area of the disc. Avoid pointing the cutting edge towards rotating disc
NOTE: You can use the TOOL REST accessory to sharpen your edges to precise angles. (p.8-9)
FELT DISC
Item# B-301
3
FOR CARBIDE AND EXOTIC METALS
Use 3M Micronishing Diamond Abrasives
to sharpen high-carbon steels, cobalt, titanium and others.
Use with CUSHION PADS (Item # N-3103)
Available in 4 grades & KIT: 74, 45, 30, 20 Micron
MICROFINISHING DIAMOND KIT
Item# K-3600-4
Y
DEBURRING (OPTIONAL)
Use 3M Radial Brushes (6 & 1 Micron) to sweep
the burr away from the cutting edge or flute.
Speed: Maximum
6 Micron
Item# R-362-6
Xa
1 Micron
Item# R-361-1
Xb
OPTIONAL
OPTIONAL
Apply COMPOUND on FELT DISC
Item#: C-103
Coarse
Item# AT-13035-6
2a
Medium
Item# AT-13020-6
2b
Fine
Item# AT-13010-6
2c
Very Fine
Item# AT-13005-6
2d
Apply CUSHIONS to BACKPADS.
FELT does not need a cushion.
Apply abrasives onto BACKPADS
(with the CUSHIONS applied).
Prepare FELT DISC as shown in your
USER’S GUIDE and VIDEO
SETUP
!
SAFETY FIRST!
Always wear eye
and respiratory
protection.
1
2
3