Use and Care Manual

JEWELRY POLISHING
HOW TO SHAPE & POLISH
Toll Free: 1-85-JOOLTOOL p.17 Buy supplies at WWW.JOOLTOOL.COM
KEEP YOUR FINGERS CLEAN AND PROTECTED
Use 3M™ SELF-ADHERING VETRAP™ to keep ngers and nails clean!
Simply cut to size, wrap over and around.
Don’t overtighten so you can re-use your “nger caps”!
Replacement item#: T-10G
ANIE’S TIPS:
- Use these steps for jewelry, car parts, custom metal work, etc..
- Always let your abrasives do the work, use a gentle touch, do NOT use force!
- Gently apply your piece to the spinning abrasive disc, making full contact.
- Keep moving your piece to achieve a much-desired uniform shape (or polish)
- You can also use a certain step individually if that is your desired nal nish.
FULL METALWORKING AND
POLISHING KIT Item# K-1003
!
SAFETY FIRST! Always wear eye
and respiratory protection.
REMOVE SCRATCHES & PRE-POLISH
Use 3M™ EXL SCRATCH-ERASER abrasive to rub
o scratches, scu marks and porosity,
all without removing material!
POLISH
Use SEE-THRU FELT DISC for crisp, precise polishes.
Use WITH compound.
BUFF TO A HIGH-POLISH
Use COTTON BUFFING WHEEL for a
show-quality shine on your pieces.
Use WITH compound.
POLISH DETAILS AND PLATING
Use 3M™ RADIAL BRUSH to polish hard-to reach
details and reliefs.
Safe for rhodium plating.
Does NOT damage stones.
Use WITHOUT compound.
GRIND and SHAPE the piece
Use 3M™ PURPLE CERAMIC abrasive to remove
sprues from castings, grind or shape your piece.
Apply COMPOUND on FELT DISC & BUFFING WHEEL
Item#: C-103
Twist onto the
spindle to INSTALL
Bristles must sweep,
not grab, when spinning .
NOTE: A JEWELRY PROJECT IS PICTURED
BELOW. SAME STEPS CAN ALSO BE APPLIED
TO OTHER INDUSTRIES
1
4a
BONUS STEP
4b
2
3
FOLLOW FROM
TOP TO BOTTOM
SCOTCHBRITE EXL
Item# S-3601
2
PURPLE CERAMIC
Item# AC-13120-6
1
FELT DISC
Item# B-301
3
BUFFING WHEEL
Item# B-9335
4a
RADIAL BRUSH
Item# R-341-1
4b
Apply Abrasives
onto BACKPADS.
Apply Scratch Eraser
on BACKPAD
Apply and Prepare
FELT DISC
SETUP
1
2
3
* Except Carbides
ALL METALS*