Use and Care Manual

SAFETY
PLEASE READ & UNDERSTAND THIS BEFORE OPERATING THE JOOLTOOL™
ALWAYS work in a well-lit, distraction-free environment. Keep work area clean and clutter free.
Keep bystanders and all pets (animals) AWAY from work area while operating the unit.
GRINDING MAY CAUSE SPARKS. NEVER operate tool in the presence of flammable materials.
DO NOT VACUUM SPARKS into canisters containing flammable particles.
Use separate collection containers when performing metal and wood applications.
ALWAYS make sure JOOLTOOL switch is set to “OFF” BEFORE plugging it in the power outlet.
Leaving the switch “ON” before plugging can lead to accidents. See “POWER ON” p.6
ALWAYS Remove all adjusting tools (keys and/or wrenches) from unit before turning “ON.”
A key or wrench that is left attached on a rotating part can cause personal injury.
NEVER reach over the machine while the wheel or disc is in motion.
A rotating wheel or disc can grab any object in its path, potentially resulting in injury
ALWAYS wear eye, hand/ finger protection and use a NIOSH-approved respirator for all grinding, sanding and finishing.
A thick apron is recommended for industrial applications.
ALWAYS Keep loose clothes, jewelry and hair AWAY from rotating parts. Long hair should be contained properly.
Wear non-skid shoes or stand on non-slip surface/rubber mat and always keep proper footing and balance at all times.
ALWAYS use a properly grounded 110 / 240V electrical outlet.
ALWAYS use approved electrical outlet adaptors when using the unit outside of the U.S.A.
NEVER alter the plug or tamper with the converter box in any way to fit into an electrical outlet other
than the ones described above. Serious electrical shock and injury can occur.
ALWAYS routinely inspect the power cord for any nicks, cracks, cuts or damages.
(Make sure unit has been unplugged prior to inspection.) If any physical damage is found, contact the
manufacturer or an authorized service center for information on replacement or repair. Refer to the
warranty page for correct instructions on returning your product, regardless if it is under warranty or not.
NEVER use the tool if it is damaged; electrical shock and injury may occur.
NOTICE: SAFETY INSTRUCTIONS CANNOT ADDRESS EVERY POSSIBLE SITUATION
PLEASE USE THE INFORMATION CONTAINED IN THIS DOCUMENT AS GENERAL GUIDELINES.
ALWAYS USE COMMON SENSE AND KEEP SAFETY A PRIORITY WHEN OPERATING YOUR JOOLTOOL SYSTEM.
Keep water AWAY from ELECTRICAL CONNECTIONS. Water increases risk of electrical shock.
!
!
STAY ALERT & FOCUSED at all times, do not use the JOOLTOOL while tired or under the influence of
medication, drugs, or alcohol. A lack of concentration may result in serious personal injury.
Always use common sense and pay attention to what you are doing when using this unit.
!
If an extension cord is necessary, an adequate UL approved cord no longer than 8 feet in length is
recommended. This will prevent any damage to the power adaptor or power tool unit.
ELECTRICAL SAFETY
WORK AREA SAFETY
PERSONAL SAFETY
Toll Free: 1-85-JOOLTOOL p.4 Buy supplies at WWW.JOOLTOOL.COM