Installation Instructions

INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Connect all the Tube together, then thread the Tube (4) onto the Nipple(3) tightly, on the other side
thread the Tube (5) onto the Nipple(6) tightly.
3.Use the Ball nut (2) screw the Canopy (1) tightly.
4.Thread the Finial (7) onto the Housing(8) tightly.
5.Install bulbs: (Bulbs not including in the package)
(Please don’t exceed the maximum capacity that recommended on the Sockets)
6.Press the Spring Clip (9), then put the Glass (11) onto the Socket (10) at the same time.
7.The fixture is assembled!