Installation & Assembly

Table Of Contents

Product Dimensions: 56"W*18"D*32"H

* Do not tighten bolts until completely assembled.

CARE AND MAINTENCE

Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild

cleaner. Test the cleaning method on a hidden area before using them over the

entire area.

NOTICE

* This item may require periodic tightening.

Part List and Hardware List

1 X

2 X

HW1

DRAWER

Allen bolt 1/4” - 20 x 1-3/4”

Split lock Washer 1/4”

Flat Washer 1/4”

HW3

8 X

1 X

METAL FRAME

* This item should be assembled on a soft surface to prevent scratching the

finished product during assembly.

* Please make sure that you have all parts indicated before you begin assembly

of this item.

Weight Capacity : 200 lbs

Warning : Do not stand on the product

Warning : Do not over torque bolts

WARNING

HW4

Piece Description Picture Quantity

METAL CROSS BAR

HW2

20 X

5 X

Allen bolt 1/4” - 20 x 5/8”

Split lock Washer 1/4”

Flat Washer 1/4”

ALLEN KEY 4mm

Anti-Tip Hardware

PAGE 1
CARE AND MAINTENCE Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using them over the entire area. NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item. * This item should be assembled on a soft surface to prevent scratching the finished product during assembly. * This item may require periodic tightening. * Do not tighten bolts until completely assembled.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time:15 minutes. Tools Required for Assembly (included): Allen Key (included) and Philips head screwdriver (not included).