Operation Manual

4.0 Installation

• Before installing the ﬁ replace, check it carefully for any

signs of damage.

• The product is heavy! Ask someone to help you when

positioning and installing it.

• Make sure that furniture and other household items

are at a safe distance from the ﬁ replace to protect

them from drying out.

• Do not place anything on the top plate of the stove as this

could cause permanent damage to the paint/enamel.

4.1 Prior to installation

• When the product is unpacked, take out the ash pan and its

contents, the ﬁ re grate, burn plates, bafﬂ e plates, exhaust

deﬂ ector and the cover plate for the external air supply

before the stove is being used for the ﬁ rst time.

4.1 Preparations - Jøtul F 134 / F 135

with base

Fig. 3

1. Remove the four transport screws (A) that fasten the stove

to the wooden pallet.

2. Leave the stove standing on the transport pallet.

3. Remove the gloves from the ash pan.

4. Remove the bafﬂ e, inner bottom plate, and bag of screws

from the burn chamber.

5. Check that the control levers (B) move easily.

Fig. 4

6. Fit the height adjustment screws (A) together with plastic

caps (B) which are in the bag of screws. NB: If using the

glass ﬂ oor plate option, the stove must be raised approx.

8 mm off the ﬂ oor to allow the ﬂ oor plate to be slid under

the front edge of the base.

7. Lift the stove off the pallet.

8. Perform a trial installation of the stove, using the 4 height

adjustment screws to ensure it is horizontal.

9. Mark on the wall if there are to be rear vents for the ﬂ ue

pipe and/or outside air supply. NB: Make allowance for the

height of the ﬂ oor plate.

ENGLISH