Operation Manual

45
Fig. 4
a
c
b
1. Remove the packaging (cardboard and wooden frame) and
spread the cardboard out on the floor behind the fireplace.
2. Leave the stove standing on the transport pallet.
3. Remove the top plate (Fig. 4 A) with the top grate (Fig. 4 B).
These parts are not to be used.
4. Remove the gloves and bowl from the ash pan. The bowl will
not be used.
5. Check that the control handles (Fig. 4 C) move freely.
Fig. 5
6. Carefully lay the stove down on its back. Rest the stove on a
pallet and three packaging frames (see Fig. 5).
Fig. 6
7. Screw in the 4 threaded bars.
Fig. 7
A
A
A
A
8. Mount the outside air connection with 4 nuts and washers
(Fig. 7 A).
30-35mm
9. Mount the adjusting nuts on threaded bars.
ENGLISH