User manual

www.sainsmart.com

joystick, etc.

The MEGA2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new

pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage

provided from the board. The other is a not connected and is reserved for future purposes. The

MEGA2560 R3 works with all existing shields but can adapt to new shields which use these

additional pins.

Features:

*Microcontroller ATmega2560

*Operating Voltage 5V

*Input Voltage (recommended) 7-12V

*Input Voltage (limits) 6-20V

*Digital I/O Pins 54 (of which 15 provide PWM output)

*Analog Input Pins 16

*DC Current per I/O Pin 40 mA

*DC Current for 3.3V Pin 50 mA

*Flash Memory 256 KB of which 8 KB used by bootloader

*SRAM 8 KB

*EEPROM 4 KB

*Clock Speed 16 MHz