User manual

www.sainsmart.com
Copyright © 2013 SainSmart All Rights Reserved
for(i=2;i<18;i++) {
digitalWrite(i, LOW);
}
digitalWrite(row5, LOW);
digitalWrite(row6, LOW);
digitalWrite(row7, LOW);
digitalWrite(row8, LOW);
}
void loop(){
int i;
//the row # 1 and col # 1 of the LEDs turn on
digitalWrite(row1, HIGH);
digitalWrite(row2, LOW);
digitalWrite(row3, LOW);
digitalWrite(row4, LOW);
digitalWrite(row5, LOW);
digitalWrite(row6, LOW);
digitalWrite(row7, LOW);
digitalWrite(row8, LOW);
digitalWrite(col1, LOW);
digitalWrite(col2, HIGH);
digitalWrite(col3, HIGH);
digitalWrite(col4, HIGH);
digitalWrite(col5, HIGH);
digitalWrite(col6, HIGH);
digitalWrite(col7, HIGH);
digitalWrite(col8, HIGH);
delay(1000);
//turn off all
for(i=2;i<18;i++) {
digitalWrite(i, LOW);
}
delay(1000);
}
The experiment’s code are as follows:
By dynamic scanning, it shows letter A in the position1 of the LED matrix.