Instruction Manual

11
Name Function
Ⓐ
Presser Foot
Suitable presser foot for the stitch pattern is displayed.
Ⓑ
Needle Position
Needle position
is displayed.
Ⓒ
Type of Throat Plate
The type of throat plate is displayed.
: Standard throat plate
: Throat plate for straight stitch
Ⓓ
-
Sewing Condition
Stitch Pattern which is sewn currently or to be sewn is displayed.
❶
Sewing-start back
tacking icon
Automatic back tacking at the start of sewing can be set.
: OFF : Reverse stitch : Lock stitch
❷
Thread tension icon
Press the thread tension icon when you want to change the thread ten-
sion.
The thread tension set value will be returned to the initial value by select-
ing a di󰀨erent pattern.
❸
Sewing-end back
tacking icon
Automatic back tacking at the end of sewing can be set.
: OFF : Reverse stitch : Lock stitch
❹
Pattern selection
icon
Press this icon to select a pattern.
Pattern number of the selected pattern is displayed.
❺
Pattern edit icon
Stitch patterns can be edited.
❻
“JUKI Smart Feed”
adjustment icon
Adjustment value of “JUKI Smart Feed” can be set.
❼
Presser foot auto lift
icon
Presser foot lifting after thread trimming can be set.
: OFF : ON
❽
Automatic thread
trimmer icon
Back tacking and thread trimming can be set.
: OFF : ON
❾
Needle position icon
Press this icon to change the needle position.
󱢳
USB icon
This icon is displayed on the pattern edit screen when a USB thumb drive
is inserted into the USB slot of the sewing machine.
Patterns can be “captured” from and “written” in the USB thumb drive by
pressing this icon.
󱢴
Repetition sewing
This icon can be used to set for sewing a combination pattern in repetition
or for sewing a single pattern by one cycle.
In the case of sewing the pattern by one cycle, “1” is displayed.
Initial setting
Single pattern: Repetition
Combination pattern: 1