Instruction Manual

* Be aware that the presser foot goes up automatically

when the power to the sewing machine is turned ON.

The screen shown on the left when the power to the sewing

machine is turned ON.

The needle moves and the screen shown on the left disap-

pears by pressing [OK] .

■

Turning the power ON

Turn ON the power switch. (Turn to “I”)

Do not place ngers under

the needle

●

Lock mode

The power to the sewing machine should be turned OFF for the sake of safety when changing the presser foot,

changing the throat plate and feed dog, changing the needle or taking care of the sewing machine. However,

those kinds of work can be carried out while retaining the current settings of the sewing machine by putting the

sewing machine in the lock mode.

・

When you want to put the sewing machine in the lock mode, keep the feed dog UP / DOWN / LOCK MODE

button held pressed for two seconds.

・

When you want to reset the lock mode, keep the feed dog UP / DOWN / LOCK MODE button held pressed

for two seconds.

・

When turning o󰀨 the machine, lock mode is disengaged.

If the sewing machine is put in the lock mode, operation of

all operating buttons, operating keys and operation panel

will be disabled. In addition, the sewing machine itself will

also be disabled.

The screen shown on the left is dis-

played when you turn ON the power

to the sewing machine for the rst

time after the delivery.

1. Select the language for display.

2. Press [Start].

3. Set the wireless LAN to which the

sewing machine is connected.

4. Enter the password for the wire-

less LAN.

5. Press [CONNECT] .

* This screen is not displayed when you turn ON the power to the sew-

ing machine next time.