Instruction Manual

22
4.5. Placing and releasing “JUKI Smart Feed”
“JUKI Smart Feed” is used when sewing the materials (knit, jersey, vinyl cloth, articial leather, etc.) that are general-
ly hard to be fed, and the materials (quilt, etc.) that are likely to cause uneven material feed.
“JUKI Smart Feed” can only be used for sewing limited types of patterns.
Refer to “12. List of stitch patterns” for the patterns that can be sewn with the “JUKI Smart Feed”.
●
Placing “JUKI Smart Feed”
Raise the presser foot.
Fully lower “JUKI Smart Feed”
❶
while pinching it with
ngers.
When “JUKI Smart Feed” is tted appropriately, the
relevant icon is displayed on the screen.
●
Adjusting “JUKI Smart Feed”
Press
.
Adjust the “JUKI Smart Feed” by sliding your nger on
the scale mark part.
The “JUKI Smart Feed” can also be adjusted by turning
the adjusting dial.
(Setting range: -5.0 - 5.0)
The top feed amount
is decreased.
The top feed amount
is increased.
When you tap the portion above the semicircular por-
tion shown in the above-given gure, the setting you
have done is conrmed. Then, the screen returns to
the previous screen.
●
Releasing “JUKI Smart Feed”
Raise the presser foot.
Pinching “JUKI Smart Feed”
❶
, pull it down and push
backward until it is brought to its upper position.
❶
❶
White: Initial value
Blue: Changed value