Instruction Manual

31
4.11. Needle thread preparation
■
Preparation
1
Make sure to push the needle to the top.
If the needle is not attached appropriately, the needle
cannot be threaded with the automatic needle thread-
er.
* Use the needle: No.11-16 and the thread:
No.30-90.
2
Align the marking
A
at the hand wheel
with the one on the machine body.
3
Turn the power ON.
4
Lift the presser foot.
* You can thread the machine correctly on
condition that the machine is turned on and
presser foot is up position.
5
Keep the feed UP / DOWN / LOCK MODE
button held pressed to put the sewing
machine in the lock mode.
Turn o󰀨 the machine
A