Instruction Manual

4.15. Setting the automatic back tacking, thread trimming and

presser foot lifting

The back tacking at the beginning and end of sewing and the back tacking and thread trimming / presser foot lift after

thread trimming at the end of sewing can be set.

Select a pattern. Set operations of the sewing machine

by pressing the relevant button on the screen.

Sewing end

Press the button which corresponds to the type of back tacking

you have selected.

(

/ )

Even if you press the button that does not correspond to the

type of back tacking you have selected, the back tacking you

have selected will be carried out.

Sewing start

Place the material at the sewing start position and begin sewing.

In the case the back tacking at the beginning of sewing is se-

lected, the reverse stitch button and back tacking button will not

operate.

●

In the case of setting the automatic back tacking

Setting for the back tacking at the beginning of sewing

Select one from the three types of back tacking.

: OFF : Reverse stitch : Lock stitch

Setting for the back tacking at the end of sewing

Select one from the three types of back tacking.

: OFF : Reverse stitch : Lock stitch

Presser foot lift after thread trimming

: OFF The presser foot is not lifted after thread trimming

: ON The presser foot is lifted after thread trimming

Back tacking and thread trimming

: OFF Thread trimming is not carried out

: ON Thread trimming is carried out