Instruction Manual
40
4.16. When changing the needle position
Press
.
Change the needle position by sliding your nger on the
scale mark part.
The needle position can also be changed by turning the
adjusting dial.
When you press
, the needle is brought to the left-
most position.
When you press , the needle is brought to the right-
most position.
The leftmost end represents “0.0” The rightmost end rep-
resents “7.0”.
The needle position is represented by
of .
Numeric values displayed on the screen: In mm
0.0 3.5 7.0
* If a new pattern is selected, the set value will be re-
turned to the initial value.
When you tap the portion above the semicircular portion
shown in the above-given gure, the setting you have done
is conrmed. Then, the screen returns to the previous
screen.
White: Initial value
Blue: Changed value
The needle is
moved to the left.
The needle is
moved to the right.
The needle position can be changed even during sewing.