Instruction Manual

43
4.19. Setting the stop position of needle
It is possible to set the position of the needle (upper or lower position) at the time of stopping the sewing machine.
Select [Pivot] from [Setting].
● Setting the ON / OFF of the pivot function
: ON
: OFF
● Setting the pivot height
Set the pivot height by sliding the slide bar with your
nger to the right or left.
When you tap the portion outside the setting screen, the
screen returns to the common setting screen.
Select [Stop position of needle] from [Setting].
Select the “Lower stop position” or the “Upper stop posi-
tion”.
When you tap the portion outside the setting screen, the
screen returns to the common setting screen.
* In the case the “upper stop position” (the sewing ma-
chine stops with its needle up) is selected, the pivot
function will be automatically turned OFF.
4.20. Pivot setting
It is possible to set so that the presser foot goes up while the needle is kept at the lower position at the time of stop-
ping the sewing machine.