Instruction Manual
6
“IMPORTANT SAFETY INSTRUCTIONS”
..1
Contents ................................................... 6
1. Conguration and functions ..............8
1.1. Operating buttons .................................... 9
1.2. Operation panel ...................................... 10
2. Accessories .......................................12
3. Set-up .................................................14
3.1. How to install Wide Table....................... 14
3.2. Changing the position of
the foot switch........................................ 15
3.3. Installation of knee lifting lever ............. 15
4. Basic settings and
basic operations .............................16
4.1. Connecting to the power supply .......... 16
4.2. Speed control .......................................... 18
4.3. Lifting/lowering of the presser foot ...... 19
4.4. Changing the presser foot ..................... 20
4.5. Placing and releasing
“JUKI Smart Feed” ................................ 22
4.6. Changing the throat plate and the feed
dog .......................................................... 23
4.7. How to use the throat plate for straight
stitch ....................................................... 24
4.8. Attaching the needle .............................. 25
4.9. Fabric, thread and needle table ............. 26
4.10. Bobbin thread preparation .................... 27
4.11. Needle thread preparation ..................... 31
4.12. How to adjust thread tension ................ 36
4.13. Setting the presser foot pressure ......... 38
4.14. Setting the micro-lifter ........................... 38
4.15.
Setting the automatic back tacking, thread
trimming and presser foot lifting
........... 39
4.16. When changing the needle position ..... 40
4.17. When changing the zigzag width .......... 41
4.18. When changing the stitch length .......... 42
4.19. Setting the stop position of needle ....... 43
4.20. Pivot setting ............................................ 43
Contents
5. Setting for the pattern sewing ..........44
5.1. Single mode / Combination mode ......... 44
5.1.1. Single mode ..................................... 44
5.1.2. Combination mode .......................... 45
5.2. Types of patterns under the single mode,
and how to selected a pattern .............. 46
5.2.1. Practical ........................................... 46
5.2.2. Buttonhole ....................................... 48
5.2.3. Appliqué ........................................... 49
5.2.4. Tapering ........................................... 49
5.2.5. Quilt line ........................................... 50
6.2.6. Scallop ............................................. 50
5.2.7. One-point ......................................... 51
5.2.8. Decorative ........................................ 52
5.2.9. Vintage ............................................. 53
5.2.10. Feather / Lace ................................ 53
5.2.11. Letters ............................................ 54
5.3. Combination of patterns under the com-
bination mode ........................................ 55
5.4. Types of edit functions and how to use
them ........................................................ 58
5.4.1. Pattern inversion ............................. 59
5.4.2. Setting the interval between
patterns ................................................. 60
5.4.3. Reset settings .................................. 60
5.4.4.
Writing / capturing the pattern data
.. 61