Operation Manual

Connecting to the power supply

Not-using foot-controller that using start/stop-

button:

1. Turn OFF the power switch (turn to “O”)

2. Insert cord-connector into machine-socket-inlet.

3. Insert plug into socket-outlet.

4. Turn ON the power switch. (Turn to “I”)

Using the foot-controller:

1. Turn OFF the power switch (turn to “O”)

2. Insert the foot-controller-plug into the foot-controller-jack.

3. Insert cord-connector into machine-socket-inlet.

4. Insert plug into socket-outlet.

5. Turn ON the power switch. (Turn to “I”)

* When the foot controller is plugged in, the start/stop but-

ton cannot be used to start sewing.

Start button: Can not operate to start sewing.

Stop button: Can operate to stop sewing.

• Disconnect the plug and turn off the power switch (turn

to “O”) that always sewing machine is not to use.

WARNING

Power switch

Plug

Foot controller

Foot-controller-plug

Foot-controller-

jack

Machine receptacle

Operating power switch:

Turn OFF the machine, set the power switch to "0"

Turn ON the machine, set the power switch to "I"

OFF

WARNING (For U.S.A.,Canada only)

This appliance has a polarized plug (one blade wider than

the other). To reduce the risk of electric shock, this plug is

intended to t in a polarized outlet only one way. If the plug

does not t fully in the outlet, reverse the plug. If it still does

not t, contact a qualied electrician to install the proper

outlet. Do not modify the plug in any way.

* Be aware that the presser foot comes down automatical-

ly if you turn the power ON with the presser foot lifted.