Operation Manual

16
Removing and installing the
presser foot
Removing and installing presser foot holder
Removing presser foot
1. Raise the needle and presser foot.
2. Press the presser foot releasing button to remove the
presser foot.
Installing presser foot
Align the pin of the presser foot and the groove in the
presser foot holder. Then lower the presser foot holder
with the presser foot lifting lever.
* Each presser foot has a marking. Use the appropriate
presser foot for the stitch pattern to be sewn.
Removing presser foot holder
1. Lift the needle and presser foot lifting lever.
2. Loosen the setscrew of the presser foot holder to the
left and remove the presser foot holder.
Installing presser foot holder
Align the screw hole at the presser bar with the hole of
presser foot holder (long groove). Tighten the setscrew
rmly by turning it to the right side.
Changing the presser foot
Turn OFF the power before
replacing presser foot.
Attention
Presser foot
releasing button
Presser foot holder
Presser foot
Groove in presser
foot holder
Pin
Presser foot
marking
Setscrew of presser
foot holder
Presser foot holder
Setscrew of presser
foot holder
Presser foot holder
Presser bar
* Do not lift the presser foot with the presser foot auto
lift button before turning the power OFF.