Operation Manual

Lift the presser foot lifting lever.

Make sure to push the

needle to the top.

It is impossible to perform

stitching if the needle is not

correctly installed or a bent

needle is used. Pay close at-

tention as this will cause ma-

chine malfunction.

Note:

Small spool

Large spool

Place a thread spool to the spool pin and

a spool cap onto the spool pin.

There are three types of the spool caps, large, medi-

um and small. Choose the size of spool cap according

to thread spool to be used.

Threading the needle thread

* Use the needle: No.11-16

and the thread: No.30-90.

When twin needle is used,

the automatic needle

threader can not be used.

* Align the marking at the

hand wheel with the one

on the machine body.

Spool cap

Needle thread preparation

Turn OFF the power switch be-

fore threading the machine head.

Attention