Operation Manual

24
Release the threading lever and the
needle thread is threaded to the needle
eye.
1
Lower the presser foot.
* The automatic needle threader sometimes fails
to thread the needle when the presser foot is
raised.
2
Thread to
A
and cut the thread with the
thread cutter.
4
3
Lower the threading lever until it comes to
a complete stop.
*
Lower the threading lever slowly.
Threading lever
A
Thread cutter
Lift the presser foot. Then, draw the
needle thread backward.
Pull out the thread from the needle eye by approx.
10 cm or 4 inches long.
5
* Be careful that the cutter is inside.
Automatic needle threader