Operation Manual

25
Basic operation:
You can start to sew without pulling up the bobbin
thread, however, if you want to sew with the bob-
bin thread pulled out, follow the directions below.
Pull out both needle and bobbin threads
by approx. 10 cm (4 inches) long and pass
them under the presser foot towards the
back of the machine.
1
Lift the presser foot and lightly hold the
end of the needle thread.
2
Turn the hand wheel towards you to move
the needle up and down. Loop of bobbin
thread will be pulled out when you will
pull the needle thread lightly.
3
Pulling up the bobbin thread