Operation Manual

26
Attaching the needle
Needles to be purchased
When purchasing spare needles,
specify HA X 1 (130/705H) or HA X 1
SP (needle for knits) .
Checking the needle
Check the needle for its straightness occasionally.
Any bent needle would cause skipped stitches, thread
breakage or damage to materials.
Flat object
The at part of the needle
Shank
Needle size:
The larger the number, the thicker the needle.
Needle setscrew
Stopper pin
Hold the needle
with its at part
facing away
from you
If the needle is not properly installed or a bent
needle is used, needle breakage can be caused.
It will cause damage to the machine.
1
Removing needle
1. Turn the hand wheel towards you until the needle
comes to the highest position and lower the presser
foot.
2. Turn the needle setscrew towards you 1-2 times
and remove the needle.
2
Attaching the needle
(The needle cannot be inserted unless it
is correctly positioned.)
Hold the needle with its at part facing away from you,
and insert it fully until it touches the stopper pin.
Securely tighten the needle setscrew.
Attention:
Screwdriver
When changing the needle,
turn off the power.
Warning