Operation Manual

34
Push and check the stitch pattern in this
portion and select.
DX5
How to select a stitch pattern
☆
There are 185 types of stitch patterns.
☆
When turning on the machine, the straight stitch of the center needle position is chosen automatically.
☆
There are 4 methods to select stitch pattern.
Pattern
No.
1 2 3 4 5 6 7 8 9 0
Pattern Application
Center
needle
position
Piecing
7mm
Piecing
1/4”
Zigzag stitch Applique Over casting stitch Blind stitch Straight reinforced stitch Buttonhole
Straight stitch
Refer
to
page
37 66 66 43 67 68 44 46 42 49
Pattern
No.
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
Pattern Application
Left
needle
position
Center
needle
position
Left
needle
position
Right
needle
position
Three point zig zag Two point zig zag Overcasting stitch Overcasting stitch Used for lightweight material Overcasting stitch Used for exible material Ornamental pattern Blind stitch Used for lightweight material Blind stitch Used for exible material Shell tuck Fly stitch Bar tack Eyelet Button sewing
Straight stitch Straight stitch for elastic Zigzag stitch
Refer
to
page
37 42 43 43 45 - 44 45 - - - 64 46 46 - - 58 - - 57
On the LCD screen you will see
the selected stitch pattern and
the marking of the presser foot
to be used.
・
Practical patterns
❶
Direct patterns
❷
Other patterns
Push and select a pattern type from with select button
(
or ). Then, select a pattern with its pattern number.
Select stitch pattern by number.
Pattern can also be selected using .