Operation Manual

38
When sewing the edge of thick
fabrics
Turn the hand wheel and let the needle enter at the posi-
tion of sewing start. Push the black button
A
by nger and
lower the presser foot. Release the finger from the black
button and start sewing. When the presser foot will be on
the fabric completely, the black button will be disengaged
automatically.
When changing the sewing direction
When you stop the sewing machine, the sewing machine
stops with its needle down and the presser foot automati-
cally goes up.
Then, change the sewing direction and re-start the sewing
machine.
★
Seam guide line on the throat plate
Align the fabric edge with a seam guide line and sew.
* Numbers on the guide line show the distance in mm and
inches between the center needle position and the guide
line.
Numbers, 7, 10 and 20 are millimeter.
Numbers, 1/ 4, 5/ 8 and 1 are inches.
5 mm
On center needle position basis
(Refer to page 90 )
Presser foot pivot function
The presser foot pivot function can also be turned
OFF.
A