Operation Manual

49
Buttonhole stitches
Buttonhole type
* The buttonhole length is automatically determined only by placing a button on the buttonhole press-
er foot.
*
The machine can sew buttonholes for buttons with diameters of 0.7 - 3.2 cm.
*
In case of stretchy fabrics, use non-elastic interlining on the wrong side of the fabric.
*
Make sure to perform test sewing to see that the machine sews buttonholes correctly.
*
Buttonhole Nos. 09 - 12 are for knit fabrics and should be used with a knit needle.
Pattern No.
Direct 0
Buttonhole 01, 02,
04~15
Presser foot
Buttonhole presser
foot (E)
0
Standard buttonhole
Buttonhole for medium to heavy
weight materials
Standard buttonhole
01
Stitch length is larger.
Buttonhole for heavy weight ma-
terials
02
Sews buttonhole double
03
Manual 2-step buttonhole
Use this buttonhole, when there
is an overlapped section in the
fabric or when you want to sew
larger buttonhole than 3.2 cm
diameter. (Refer to page 55)
04
Rounded end
Buttonholes for women’s blouses
and children’s clothes.
Also for light weight materials
05
06
Keyhole
Keyhole buttonhole for heavy
weight materials such as suits,
jackets, coats, etc.
07
Round keyhole
08
Large and thick keyholes for
heavy weight materials
09
For knit
Buttonhole for light weight knit
(also used as decorative button-
hole)
10
Buttonhole for medium weight
knit (also used as decorative
buttonhole)
11
Buttonhole for light weight knit
Sews buttonhole double
12
Buttonhole for medium weight
knit
Sews double buttonhole
13
Decorative
Decorative buttonholes
Decorative buttonhole which look
like hand-sewn
14
15
* Refer to page 55 for button-
hole 03.
Pattern
number
Attention
Turn OFF the power switch
before replacing the presser
foot.