Operation Manual

58
Bartacking
Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will automatically make a
u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use ller fabric or cardboard.
Fabric
example of use
Trousers
and skirt
Bag
Pocket
2
Place the fabric under the presser foot.
10 cm
1
Pass the needle thread through the
presser foot.
Pattern No.
Practical 18
DX7
Practical 17
DX5
Presser foot
Manual buttonhole
presser foot (I)
Attention
Turn OFF the power switch
before replacing the presser
foot.