Operation Manual

59
To sew a bartack of the same length again…
when the length of the rst bartack has been memorized,
● When the start/stop
button is pushed, the
machine starts to sew
and makes a u-turn
automatically at the
same point as the rst
bartack.
● When it comes to the
sewing end point, push
the reverse stitch button.
* The sewing machine
continues sewing unless
you push the reverse
stitch button.
* If you want to change the memorized length of the bar tack,
please select stitch pattern again.
3
Start sewing.
Push the start/stop button and the machine starts to
sew straight stitches.
4
When it comes to the turning point push
the reverse stitch button.
The machine goes back to the starting point by sewing
straight stitches and then it sews zigzag stitches to the
point where the reverse stitch button is pushed.
5
When the machine comes to the sewing
end point, push the reverse stitch button.
The machine sews lock stitches and stops.
Reverse stitch
button
Start/stop button
Starting
point
Lock
stitches
T
urning
point