Operation Manual

To further avoid fabric shifts, set the presser foot

pressure lower.

Adjustment of presser foot pressure: Refer to page

29.

Setscrew for presser

foot holder

Actuating lever

Needle

clamp

Put top layer of fabric with patchwork and/

or appliqué, quilting cotton and bottom

fabric together by using pin or basting

stitches.

Place your hands to both sides of the

presser foot and sew by pulling the

fabrics apart.

* Sew with slow to medium sewing speed.

Quilting (straight stitch)

Quilting is the process of sewing the top layer of fabric, with

quilting cotton in between and a bottom layer of fabric under-

neath.

By using the walking foot, the machine feeds both top and

bottom fabrics together at the same time, so fabric shifting is

eliminated.

Pattern No.

Direct 1, 4

Presser foot Walking foot (N)

Setscrew for presser

foot holder

Presser bar

Presser foot

holder

Assemble the walking foot.

Raise the presser bar. Loosen the setscrew for press-

er foot holder and remove the presser foot holder.

(Refer to page 16)

Fit the actuating lever on the needle clamp. Then, t

the assembling point of the walking foot in the press-

er bar. Securely tighten the setscrew for presser foot

holder.

Assembling point

Attention

Turn OFF the power switch

before replacing the presser

foot.