Operation Manual

74
Pattern
No.
-
Presser
foot
Manual buttonhole
presser foot (I)
One-point stitch/sewing letters
(in order to sew a pattern neatly, apply
interlining and conduct a test sewing rst.)
Use an iron to attach a fusible interlining to the wrong side of
fabric.
* When stitch length becomes too small, the bobbin thread
will come out to the front side of fabric and/or stitches
might get stuck. Therefore make sure to conduct a test
sewing beforehand.
Fabric
Since the pattern might be deformed accord-
ing to the type and thickness of fabric and
fusible interlining to be used, make sure to
conduct test sewing on the same fabric and
interlining.
Carry out adjustment using the
optional functions.
(Refer to page 94 for details.)
Correct shape When right side is higher than
left side,
When right side is lower than
left side,
Carry out the adjust-
ment while conducting
test sewing by pressing
Carry out the adjust-
ment while conducting
test sewing by pressing
Pattern
No.
DX7
Quilting:
03~80
Decorative 1:
01~80
Decorative 2:
01~80
DX5
Quilting:
03~50
Decorative:
01~90
Letters
Presser
foot
Manual buttonhole presser
foot (I)
Preparation before sewing
Test sewing
Adjustable range
~
Adjustable range
~
Attention
Turn OFF the power
switch before replac-
ing the presser foot.
DX7
DX5
* In the case a quilting
pattern is sewn as the
one-point stitch, some
pattern shapes can be
different from those dis-
played on the screen.