Operation Manual

90
6
Presser foot pivot function
You can select the setting where the presser foot goes up with the needle
held in the needle-down stop position when you stop the sewing machine.
Example) To set the presser foot pivot function to OFF
* Default setting is ON.
The presser foot pivot function has now
been set to OFF.
* The setting is memorized even when the machine is
turned off and on.
Press
.
Press
.
Several seconds
later.
Press
.
* In the case the needle stop
position is set to the “nee-
dle-up stop”, the presser
foot pivot function is auto-
matically set to OFF.
Press
or
to select
.
Then, press
.