Instructions / Assembly

STEP 3 : FITTING THE STITCHED BED

This step will require 2 people who must be

wearing gloves and protective eye wear.

Lay the stitched bed (with the V-Rings) out inside

the frame of the trampoline with the warning labels

facing upwards.

Locate the 4 V-Rings with the colored webbing.

These will be at 4 corners.

Slot one of the 7” springs onto one of the colored

webbing V-Rings as shown.

Important: springs must be slotted on the right way

around.

Slot the other end of the spring into one of the

spring slots in the top of the frame.

IMPORTANT: Ensure the spring is fully

inserted into the slot on the top of the frame.

Colored

webbing