Instructions / Assembly
Attach a spring to the diagonal colored stitched
V-Ring.
Important: You will now need to use the spring
tool to attach the spring to the frame.
Hook the spring tool onto end of spring, and pull
until the spring can be slotted into the spring slot
on the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame.
Attach four more springs to the V-Rings then attach
them to the frame next to the T-connector+welded tube.
T-connector+welded tube
7” Spring
7” Spring
7” Spring
7” Spring
Continue to attach springs in the same sequence
as above: in the middle of each section, making
sure the next spring is attached on the opposite
side to even out the tension.
Important: The stitched bed is designed like
elastic to be bouncy, which means that during
construction it may look like it won’t
Please
note that it will stretch to the correct size when
attaching the springs, this may take some force.
The stitched bed is now
and you have
completed step 3.
1
2
3
4
5
6
7
8