Instructions / Assembly

You will now join the two ends of the Black G3

will require two people.

Both people hold two of the poles end sections

and walk towards each other to bend the poles

into a circle.

As soon as the poles are bent enough, insert the

connectors into the socket on the other pole (1

Push the pin inwards (2

connector.

Ensure the pin is protruding through the slot in the

socket.

You may need to slide the connected poles around

in the nettings sleeves until the thin black sections

are aligned with the gaps between sleeves.

Stand on the trampoline and insert one of the

exposed sections of the Black G3 pole into a

plastic grip on top of one of the enclosure poles.

Attach the seven other exposed sections of the

G3 FRP to the other enclosure tubes in the

order shown in the diagram.

The enclosure net is now

and you have

completed step 6.