Router User Manual

Maintaining ER X Routers
Figure 45: Fan Tray in ERX-310 Router
g013765
Removing the Fan Tray
To remove the fan tray:
1. (ERX-14xx models only) Pla ce a flathead screwdriver in the groove where
the top bezel meets the chassis on the top of the system, and lever the top
bezel off t
hefrontofthesystem.
2. With an appropriate screwdriver, loosen the captive screws located at the
corners o
fthefantray.
WARNING: D
o not place your fingers near the fans when removing the fan tray.
The blades might still be moving.
3. Pull the fa
ntrayhalfwayoutoftheshelf.
WARNING: S
lowly slide the fan tray out of the chassis. The tray does not have stops
topreventitfromslidingallthewayout.
4. Pull the tr
ayoutofthechassis.
Installi
ng the Fan Tray
To instal
lthefantray:
Replacing Fan Trays 99