User manual

rubbish. The insulation foam con-
tains flammable gases: the appli-
ance shall be disposed according
to the applicable regulations to
obtain from your local authorities.
Avoid damaging the cooling unit,
especially at the rear near the heat
exchanger. The materials used on
this appliance marked by the sym-
bol
are recyclable.
2. CONTROL PANEL
1 2 3 4 5 6 7 8 9
1
Pilot light
2
ON/OFF switch (Ein/Aus)
3
Temperature regulator (warmest)
4
Temperature indicator
5
Temperature regulator (coldest)
6
Super Frost light
7
Super Frost switch
8
Alarm light
9
Alarm reset switch
2.1 Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
2.2 Switching off
The freezer is shut off by pressing the ON/
OFF switch until the Pilot light and the
Temperature indicator switched off.
2.3 Temperature regulation
The temperature can be adjusted be-
tween -15°C and -24°C.
By pressing the Temperature regulators,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashing indicator. To set a warmer tem-
perature, press warmest Temperature
regulator. To set a colder temperature,
press coldest Temperature regulator. The
Temperature indicator displays the newly
selected temperature.
The newly selected-temperature will be
reached within 24 hours.
2.4 Temperature indicator
During normal functioning the Tempera-
ture indicator shows the latest set tem-
perature.
2.5 Super Frost function
You can activate the Super Frost function
by pressing the Super Frost button.
The Super Frost light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing the Super Frost but-
ton.
The Super Frost light will switch off.
2.6 Excessive temperature
alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
Alarm light will start to flash and a buzzer
will sound.
After the temperature has returned to nor-
mal, the Alarm light will continue to flash,
although the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
compartment flashes on the Temperature
indicator .
ENGLISH 5