Specification

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone [phone] • Fax [phone] • Visit us at www.acuitybrands.com/juno-recessed
Printed in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17
1 of 1
Project:
Fixture Type:
Location:
Contact/Phone:
4” IC NEW CONSTRUCTION HOUSING
IC1 LEDT24
COMPATIBLE WITH
4RLD SERIES
G1.7.22
PRODUCT DESCRIPTION
IC Air-Loc
®
New Construction Housing for use with Juno retrofit
LED trim modules • Double wall construction • Energy efficient,
sealed inner housing does not require separate ALG gasket
• Air-Loc housing stops infiltration and exfiltration of air,
reducing heating and cooling costs • Can be completely
covered with insulation.
PRODUCT SPECIFICATIONS
Electrical Connections Features non-screw base 120V plug-in
connector • Compatible with Juno retrofit LED trim modules
Labels U.L. listed for U.S. and Canada for through-branch
wiring and damp locations • Meets high efficacy requirements of
California T24
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Specifications subject to change without notice.
INSTALLATION
Real Nail 3 Bar Hangers Telescoping, Real Nail
®
3 system covered
under US Patent D552,969
permits quick placement of housing
anywhere within 24” O.C. joists or suspended ceilings • Integral
T-bar notch and clip secures housing in suspended ceiling grid –
no accessory clips required • 24” expansion stop allows quick
placement of fixture in standard grid spacing • Bars scored in two
locations for fast, clean breaking, allowing housing installation
in tight applications • Bars captive to mounting frame • Edge-
mounted for extra strength • Captive bugle-headed ring shank nail
for quick one-step installation and easy removal with claw hammer
for fixture relocation • Quick-Loc slot and oversized locking set
screw lock fixture in position • Bar hanger foot contoured to align
to bottom of construction joist • Alternate mounting holes included.
Junction Box Pre-wired junction box provided with (6) ½” and
(1) ¾” knockouts, (4) Non-metallic sheathed cable connectors and
ground wire, U.L. listed/CSA certified for through-branch wiring,
maximum 4 No. 12 AWG 90˚ C branch circuit conductors
(2 in, 2 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 22-gauge die-formed galvanized steel
mounting frame • 8
5
/
8
” L x 6” W, (excluding bar hangers)
• Rough-in section (junction box, mounting frame, housing and
bar hangers) fully assembled for ease of installation.
Housing Air-Loc IC housing, .032” aluminum • Inner housing
is vertically adjustable to accommodate up to a 1¼” ceiling
thickness.
DIMENSIONS
4 1/2” CEILING CUTOUT
6”
6 3/4”
13 1/2”
Will expand
to 25”
(Reduces to 8 1/2”
with breakaway
feature)
12 1/4”
9 1/8”
COMPATIBLE LED MODULES
Catalog Number
4RLD G2 06LM 27K 90CRI 120 FRPC WWH
4” Juno Basics Retrofit Downlight, Generation 2, 600 Nominal Lumens, 2700K, 90+ CRI, 120V, Forward/Reverse Phase Cut, White with White Trim Ring
4RLD G2 06LM 30K 90CRI 120 FRPC WWH
4” Juno Basics Retrofit Downlight, Generation 2, 600 Nominal Lumens, 3000K, 90+ CRI, 120V, Forward/Reverse Phase Cut, White with White Trim Ring
Housing and trim can be ordered together or separate, but will always ship separately.
PRODUCT CODES
Catalog Number Input Voltage
IC1 LEDT24
4” Incandescent New Construction IC Housing, 4” Quick Connect Housing 120V
Housing and trim can be ordered together or separate, but will always ship separately.